Hi this is Julie with Beadaholique.com
and today I’m going to show you how to use this Speeder Beader needle and try to say that
fast ten times this is the Speeder Beader needle and when you get it it’s going to come in a package like this and the way you read this is that it’s color coded so the cap is indicative
of what size Soft Flex or beading wire you’re going to use with it. So here I have a green cap
cap so this is going to be .019L inches and that’s going to be the beading wire I actually pulled some here that is .019L you just match up the one here still in the package has a
black cap so this goes to .01L that’s how you read that and order the create size so if you’re familiar with stringing here i’ve got a length of beading
wire. Again the .019L I put a little bead stopper on the end traditionally what you would do to get your
beads on is you would take your beading wire and just put it directly
through the hole and this works perfectly fine but it
can be time-consuming and tedious too if you’re doing a really long necklace or other type of project So the Speeder Beader needle is great
because it has a hollow core to it so you’re going to take you’re beading wire and you’re going to put it in at a forty five
degree angle into this little slot right here and watch what happens you push it all the way in. So it’s a hollow
needle and what that does is it grabs the beading wire and now you can go
ahead and just use it as a needle to put your beads on.
It goes really quick and easy It save a lot of time and it’s very
fun to use as well It’s going to stay in there. It might pull out a
little bit, just push it right back in and as long as you’re holding your
needle like this or like this your probably gonna be okay you
won’t want to drop it it will come out. So you want to make
sure that end of your jewelry project is on a flat surface so that it
takes the weight but if it does pop out you just go ahead and put it right back in now the big advantage to this is you know
that traditionally if you have a needle you’re going to put it through the eye then it’s gonna be doubled which is going to create quite a bit more thickness which makes it hard to
go through a small hole in a bead so this is perfect because it just has that single thickness to it and it’s really easy to use so that’s just a quick demonstration of the
Speeder Beader needle and how easy it is to use and I hope
you’ve enjoyed this quick and easy video

9 thoughts on “How to Use the Speeder Beader Needle”

  1. yay ! cannot wait to get a few of these and try them… def going to make my beading easier… 🙂 thanks !

  2. The monofilament string is probably not stiff enough to be used for this application and will most likely fall out of the needle. You need the stiffness of the beading wire to hold it in place.

Leave a Reply

Your email address will not be published. Required fields are marked *